Skip to content
Masif Pencere

Caring for timber windows: a little attention, a long life

· 2 min read

Properly made timber windows need far less maintenance than people expect. A short check and clean once a year keeps them working like new for many years. Here's what to do.

1. Cleaning: soft cloth, warm water

Wipe the frames with a soft cloth and warm, mildly soapy water. Abrasive cleaners, bleach, thinners and scouring pads damage the finish. Dry the surface afterwards. Near the sea, salt can build up, so cleaning twice a year is a good habit.

2. Check the gaskets

Open the sash and look along the gasket. It should be flexible — not flattened, cracked or pulled out of its groove. A damp cloth is all it needs; avoid oily products. Our windows use two separate gaskets, so insulation continues even if one is damaged, but a worn gasket should still be replaced in good time.

3. Look at the bottom rail and drip

Rot in timber joinery most often starts on the bottom rail, where rainwater collects. Make sure the aluminium drip rail is clean and drainage isn't blocked by leaves, dust or sand.

4. Hinges and hardware

If a sash feels heavy or doesn't close properly, the hardware may need adjusting. Apply a little suitable lubricant to moving parts once a year. Don't force it — if it needs adjusting, give us a call.

5. Inspect the finish

The protective coating shields the timber from sun and moisture. If you notice:

  • fading,
  • a dull, chalky surface,
  • hairline cracks or blistering,

a refresh coat is due soon. South- and west-facing elevations that get the most sun need attention more often. Touching up small scratches or knocks early stops them from becoming bigger problems.

How often?

Task Frequency
Cleaning 1–2 times a year
Gasket and drip check Once a year
Hardware care Once a year
Refresh coat Every few years on sunny elevations

How often you'll need a refresh coat depends on orientation and exposure, so we won't give a fixed number — the surface itself is the best guide.

Why timber is worth it

Timber's biggest advantage is that it can be repaired: a weathered surface can be sanded and refinished to look almost new. Curious how it compares with plastic? Read our timber vs uPVC guide.

Not sure about the condition of your windows? Send us photos on WhatsApp or fill in the quote form and we'll take a look.

Product in this article

Let us come and measure.

Free site survey in Fethiye and the surrounding area.

WhatsAppGet a Quote